Factors affecting the output of Clinker Grinding Machines
When the Clinker Grinding Machine powder is used, the output will be affected by many factors, mainly due to factors such as the particle size of the finished product, the hardness of the material, the humidity of the material, the composition of the material, the viscosity of the material, and the working efficiency of the equipment supporting measures. After we understand these factors, we must adjust these factors to improve the output of the Clinker Grinding Machine. The following is a detailed analysis of the factors affecting the production factors by the technicians of Shibang Industry:
The adhesion of the milled material. That is, the greater the viscosity of the material, the easier it is to adhere. The higher the viscosity, the smaller the output of the Clinker Grinding Machine, and the easy impact on the service life of the Clinker Grinding Machine, so please use the Clinker Grinding Machine to use the standard homework. The composition of the milling material. The more fine powder contained in the material before the Clinker Grinding Machine is milled, the more the grinding powder and the humidity of the grinding material are affected.
That is to say, when the moisture contained in the material is large, the material is easily adhered in the Clinker Grinding Machine, and is easily blocked during the feeding process. The qualified material is not easily separated under the condition of equal wind, resulting in the grinding capacity of the Clinker Grinding Machine. reduce. Since these fine powders adhere easily to the transport. For the fine powder, it should be sieved once in advance. In this case, it is recommended to sieve the material once with a vibrating screen before the milling process. The first is the impact of the finished product size. The higher the fineness of the material after the Clinker Grinding Machine is milled, the smaller the milling capacity of the Clinker Grinding Machine. If the customer has higher requirements on material fineness and other equipment such as ultra-fine Clinker Grinding Machine according to his own ability and economic strength, the fineness of the finished product of Shibang Industrial’s Clinker Grinding Machine can reach 2,500 mesh.
Followed by the hardness of the material. The harder the material Clinker Grinding Machine is, the harder it is to grind and the more severe the wear on the equipment. The Clinker Grinding Machine has a slow milling speed, and of course the Clinker Grinding Machine has a small milling capacity. The technicians of Shibang Industry suggest that this equipment should not be used to grind hard materials other than the ability to avoid unnecessary losses caused by grinding overload operation.