Hydrated Lime Manufacturing Process

Hydrated Lime Manufacturing Process

Hydrated Lime Manufacturing Process Machine working principle

The Hydrated Lime Manufacturing Process Machine is capable of grinding quartz sand. It is a commonly used milling equipment in the field of quartz sand, which can effectively improve the application taste of quartz sand. For some users who are about to purchase a Hydrated Lime Manufacturing Process Machine, understanding how Hydrated Lime Manufacturing Process Machines work can help them purchase more efficient equipment.

The working principle of the Hydrated Lime Manufacturing Process Machine can be broken down into the following parts:

Start up

The operation of the Hydrated Lime Manufacturing Process Machine main shaft and the turntable requires the motor to be driven by the operation of the reducer. Under the operation of the main shaft and the turntable, the roller pin on the edge of the turntable will drive the grinding roller to roll in the grinding ring raceway until the operation is stable.

Uniform feeding

After the equipment runs smoothly, the vibrating feeder is used to feed the quartz sand material into the Hydrated Lime Manufacturing Process Machine. This process must be uniform and continuous, and the feeding tube is also needed during the feeding process.

Dispersion Milling The material entering the Hydrated Lime Manufacturing Process Machine will be scattered to the circumference of the circle under the action of centrifugal force, and then fall into the raceway. Under the interaction of the grinding roller and the grinding ring, it will be crushed by crushing and pressing.

Powder collection

The crushed quartz sand fine material enters the classifier under the action of the blower. The classifier sorts the materials through the internal impeller, and the qualified materials are discharged through the discharge valve, and the unqualified materials are re-grinded and continuously circulated. Complete production requirements.

The Hydrated Lime Manufacturing Process Machine is equipped with a silencer, and there is basically no noise pollution during the whole grinding process. The Hydrated Lime Manufacturing Process Machine is under negative pressure throughout the grinding process, ensuring that all parts of the equipment have very good sealing performance and moving. The iron removing device of the crusher can effectively remove the iron impurities in the finished product, ensuring the high purity of the finished quartz sand, and the better wear resistance of the wearing parts of the Hydrated Lime Manufacturing Process Machine can ensure that the device has very few faults. Long service life.

Leave A Comment

Required fields are marked *. Your information will not be published or shared.