Crushing Equipment For Gold Mining

Crushing Equipment For Gold Mining

Introduction to Gold Crushing Equipment

The Gold Crushing Equipment can be used to meet the sandstone suppliers of various productions. The Gold Crushing Equipment is beautiful in appearance, durable and has a large adjustable range, which increases the flexibility of the equipment. The Gold Crushing Equipment can crush all kinds of ore and bulk materials. The Gold Crushing Equipment is mainly used in mining, smelting and building materials, chemical industry and other industries.

Gold Crushing Equipment working principle

When the Gold Crushing Equipment is working, the motor drives the belt and the pulley to move up and down. When the moving jaw rises, the angle between the bracket and the moving jaw becomes larger, pushing the movable jaw to approach the fixed jaw, and the material is squeezed. Crushed or chopped to break the material; when the moving down, the angle between the bracket and the moving jaw is changed from large to small, and the moving jaw leaves the fixed jaw under the action of the spring and the tie rod, and the broken material is from the bottom. discharge.

Gold Crushing Equipment features

Compared with the ordinary Gold Crushing Equipment, the Gold Crushing Equipment has a large crushing ratio and energy saving. The single machine can save energy consumption by 15%~30%, which can make the system more than double energy saving. The equipment can be adjusted in a wide range. To meet the needs of different users, equipment noise is low, and there is less dust in the production process.

What are the regulations for the crushing material index of the Gold Crushing Equipment?

What are the regulations for the crushing material index of the Gold Crushing Equipment? What is the achievement of the indicator? Below we will tell you about this related knowledge! When the Gold Crushing Equipment breaks down the material, it is judged that the quality of the broken product is not only the cause of the equipment itself, but also the cause of the mineral. In the end, the factors of the crushing material index of the Gold Crushing Equipment are good or bad.

The physical and mechanical properties of the ore: The first is the hardness of the ore. The hardness of the ore is expressed by the compressive strength of the ore or the hardness coefficient of the ore. In the process of beneficiation, the ore is divided into five grades based on the ore. The harder, the greater the compressive strength and the lower the productivity. On the contrary, productivity is high. In this case, the humidity of the material, the humidity itself has little effect on the crushing, but when the material contains a lot of mud and fine ore, the fine material will agglomerate or stick to the coarse particles due to the increase of humidity, thereby increasing the viscosity. The discharge speed is reduced, and the production capacity is reduced. When it is serious, the discharge port is blocked, which affects the normal production. There is also the density of ore. The production capacity of the Gold Crushing Equipment is proportional to the density of the ore. The same Gold Crushing Equipment has a high production capacity when crushing ore with high density. On the contrary, its production capacity is low. After that, the particle size composition of the crushed material, the high content of the coarse particles (size and size of the discharge port) in the crushed material and the ratio of the width of the ore to the ore of the ore are large, and the crushing ratio to be completed is large, so the production capacity is low. On the contrary, the production capacity is high. The Gold Crushing Equipment supplier believes that as long as the customer understands this, it is easy to use the Gold Crushing Equipment to smash the material and increase the yield.

Leave A Comment

Required fields are marked *. Your information will not be published or shared.