Copper Ore Beneficiation Process Equipment

Copper Ore Beneficiation Process Equipment

Factors affecting the output of Copper Ore Beneficiation Process Equipment

The Copper Ore Beneficiation Process Equipment is a commonly used industrial milling equipment. The Copper Ore Beneficiation Process Equipment is used for barite, calcite, potash feldspar, talc, marble, limestone, ceramics, glass, etc. The Mohs hardness is no more than seven grades, and the humidity is 6%. The following non-flammable and explosive mining materials, chemical, metallurgical and other industries more than 280 kinds of materials for the processing of powder, the finished product size in the range of 100 ~ 325 mesh, according to the working principle and working practice of Copper Ore Beneficiation Process Equipment, affecting vertical The main factors of pre-mill output are as follows.

First, the hardness of the material: the harder the material, the more difficult it is to grind the Copper Ore Beneficiation Process Equipment, and the more serious the wear on the equipment. The Copper Ore Beneficiation Process Equipment has a slow grinding speed, of course, the Copper Ore Beneficiation Process Equipment has a small milling capacity. It is recommended that customers use the Copper Ore Beneficiation Process Equipment in strict accordance with the instructions of the Copper Ore Beneficiation Process Equipment during daily use. Do not use this equipment to crush hard materials other than the equipment capacity. This is also a basic point of daily use and maintenance of the Copper Ore Beneficiation Process Equipment.

Second, the humidity of the material: that is, when the moisture contained in the material is large, the material is easy to adhere in the Copper Ore Beneficiation Process Equipment, and is also easily blocked during the feeding process, resulting in a reduction in the milling capacity of the Copper Ore Beneficiation Process Equipment.

Third, the finished product size: the fineness of the material after the grinding of the Copper Ore Beneficiation Process Equipment, the fineness requirements are high, that is, the finer the material required to be milled by the Copper Ore Beneficiation Process Equipment, the smaller the grinding capacity of the Copper Ore Beneficiation Process Equipment. If the customer has high requirements on the fineness of the material, other equipment can be added according to his own production capacity and economic strength. The mill has a wide particle size range and a fine particle size of up to 3,500 mesh.

Fourth, the composition of the material: the more the fine powder contained in the material before the Copper Ore Beneficiation Process Equipment grinds, the more it affects the Copper Ore Beneficiation Process Equipment grinding, because these fine powders are easy to adhere to affect the transport. For the content of fine powder, it should be sieved once in advance. In this case, we recommend that the customer first screen the material with a vibrating screen before the milling process.

Fifth, the viscosity of the material: that is, the greater the viscosity of the material, the easier it is to adhere.

The better the wear resistance of the Copper Ore Beneficiation Process Equipment of the Copper Ore Beneficiation Process Equipment (grinding roller, grinding ring) The greater the grinding capacity of the Copper Ore Beneficiation Process Equipment, if it is not wear-resistant, it will affect the grinding capacity of the Copper Ore Beneficiation Process Equipment.

There are many factors affecting the output of Copper Ore Beneficiation Process Equipment. Some of them are used by customers. For these factors, we must constantly summarize and timely avoid them. Of course, there are some technical factors of the equipment itself. For these customers, judge themselves. Reasonable and correct choice.

Leave A Comment

Required fields are marked *. Your information will not be published or shared.