Calcite Powder Grinding Mill

Calcite Powder Grinding Mill

Calcite Powder Grinding Mill operation

        
        

Q: How is the Calcite Powder Grinding Mill milled?

A: From the name of the machine, it can be seen that the grinding of the material and the “vertical milling” cannot be separated. How is it milled? We can make an image metaphor, like taking a stone shovel on a stone road. Grinding the gravel into a powder, the main pressure of its grinding comes from the gravity of the stone.

Q: How does the grinding of the Calcite Powder Grinding Mill work?

A: There is a grinding roller in the machine. It is a device like a human arm. It only installs a freely rotatable roller cover at the bottom of the roller. When there is material passing through, and the roller sleeve Friction causes the roller sleeve to rotate, thereby grinding the material. A grinding disc is installed under the grinding roller, and the grinding disc is not in contact with the grinding roller. Below the grinding disc is a speed reducer which rotates with the rotation of the speed reducer. The material is rotated along the grinding disc on the grinding disc, and then slides to the edge of the grinding disc under the action of centrifugal force, enters the middle of the grinding roller sleeve and the grinding disc, and then drives the grinding roller sleeve to rotate and be ground.

Q: What is the working principle of the Calcite Powder Grinding Mill?

Answer: The material falls from the upper feeding port of the machine into the center of the grinding disc, moves to the surroundings under the rotation of the grinding disc, and is finally ground through the above steps. The ground material will be blown up by the hot air entering the production system. The powder is selected at the upper part of the machine. The material that can pass through the classifier is qualified material, but not the material of the classifier. It will be crushed on the grinding disc by the blade and subjected to secondary grinding, thus repeatedly completing the grinding work.

Q: Is there any special reason for the Calcite Powder Grinding Mill to choose this kind of grinding work?

A: This method of grinding is also called the “dish powder” principle. This kind of grinding is equivalent to pressing the weight of the whole grinding roller on the material, and the material will be milled under the pressure. This method of grinding is a relatively labor-saving way. At the same time, the rotation of the grinding roller sleeve makes the grinding of the machine more energy-saving. In summary, it is energy-saving and efficient, so it is very popular among users.

Leave A Comment

Required fields are marked *. Your information will not be published or shared.